Find Your Next Career

Precision TIG Welder


Posted 24 days ago, Boonsboro, MD, USA
The Welder will use specialized equipment to weld and assemble new metal forms. Responsibilities: * Manufacture and fabricate finished metal products * Install and repair various equipment and ...

Welder


Posted 1 month ago, Dundalk, MD, USA
Welder/Fabricator positions available for qualified applicants. Applicants must be able to weld and erect structural and miscellaneous steel. Applicants will undergo a welding test before being given ...

Certified Welding Inpsector


Posted 1 month ago, Jessup, MD, USA
Overview As Certified Welding Inspector (CWI), this position will perform structural steel inspections on commercial and industrial buildings as well as bridges and other roadway structures ...

D1.5 Certified Bridge Welders


Posted 6 months ago, Manassas Park, VA, USA
Our company is looking for 2 or 3 additional D1.5 certified welders. Additional experiences in steel construction, erection and fitting is highly appreciated. Construction project are located mainly ...

Welders


Posted 3 months ago, Winchester, VA, USA
Requirements: · Ability to use basic hand and power tools. · Ability to use MIG welder and plasma cutter. · Ability to read and use a tape measure and square to precise measurements. · Ability to ...

TIG WELDER/MIG/Fabricator


Posted 6 months ago, Glen Burnie, MD, USA
Qualified applicant will have experience TIG welding .06 - ½" ALUMINUM as well as steel. Be familiar with shop equipment i.e. saw, drill press, belt sander, grinder. Applicant must be able to follow ...

Welder III


Posted yesterday, Chesapeake, VA, USA
The Welder III works on a team supporting cabling, equipment, and C5ISR system installations. The Welder III joins, fabricates, and repairs metal and other weldable material by applying appropriate ...

Welder


Posted 4 months ago, Baltimore, MD, USA
We are seeking full time, part time and temporary base & table Welders for 1st, 2nd & 3rd shift in Glen Burnie/Fort Meade Area. We Offer: * Medical * Dental * Vision * Life * 401K * Accidental Death

MIG Welder Operator


Posted 3 days ago, Cuyahoga Falls, OH, USA
We are looking for individuals who are looking to utilize their MIG skills as Welder Operators in our rapidly growing company! We are looking for individuals who can shine when it comes to welding ...

Welder


Posted 2 days ago, Perry, OH, USA
Welder Shift: 1st or 2nd Location: Salem, OH Pay: 14.00 - 18.00 JOB TITLE: Welder GENERAL JOB DESCRIPTION MAJOR DUTIES AND RESPONSIBILITIES * MINIMUM 1-5 YEARS OF WELDING EXPERIENCE * ABILITY TO PASS ...

Welder - Direct Hire


Posted 4 days ago, Rochester, NY, USA
Skilled Welder - Direct Hire Hours: Monday-Friday 4:00pm-12:30am Location: Rochester NY Area (West Side) Travel: Negligible Salary: Hourly rate based on experience Benefits: 100% paid medical and ...

MIG Welder


Posted 4 days ago, Kent, OH, USA
Large manufacturing company is seeking Aluminum MIG Welders for immediate positions in Kent. Starting pay is $17-18 an hour, Monday through Friday and some Saturdays. This is a contract position with ...

Fabrication Welder Fitter


Posted 3 days ago, Hadley, PA, USA
Welder Fitter Pay: Based on experience Shift: Monday - Thursday 5:30am-4:00pm Friday overtime possible Benefits: Available Summary: Layouts, fits, and welds pre-cut and fabricated components to ...

Welder Production


Posted 2 days ago, Denton, NC, USA
We are seeking a Welder Production to become an integral part of our team! The Welder will use specialized equipment to weld and assemble new metal forms. Responsibilities: * Manufacture and ...

WELDER


Posted 6 days ago, Morrisville, PA, USA
WELDER - M & M Trailer Repair has position avail. for practiced welder (steel & aluminum)/cutter willing to learn the trade of trailer repair. Apply in person at 1450 S. Pennsylvania Ave, Morrisville ...

Welder


Posted 3 days ago, Hilliard, OH, USA
As a Fabricator/Welder, you will be responsible for set-up, lay-out , and tack-up of cab frame and brackets by using various welding techniques. Hours are 1st shift from 7a-3:30pm. Starting wage is ...

Welder, MIG & TIG Welders with steel welding exp, 2nd Shift


Posted 4 days ago, Hanover, PA, USA
Welder, MIG & TIG Welders with steel welding exp, 2nd Shift - Metal component and sub-assembly manufacturer seeks 4 MIG & TIG Welders with steel welding experience to work the swing shift at their ...

welder / fitter


Posted 2 days ago, Louisa, VA, USA
Looking for Experienced Welder Fitters familiar with Steel and Stainless Must know how to read blueprints and figure out processes from start to finish to complete project. Must have knowledge of ...

Welder Fabricator


Posted 7 days ago, Bedford, OH, USA
We are seeking a Welder Fabricator to become an integral part of our team! The Welder will use specialized equipment to weld and assemble new metal forms. Responsibilities: * Manufacture and ...

Welder


Posted 2 days ago, Export, PA, USA
Attention! Great welding job available immediately! Company in the Export area is looking for an experienced shop fabricator (code welder) for a Monday through Friday, daylight position. This ...

Fitter Welder


Posted 3 days ago, City of New Castle, PA, USA
Needs to be a strong fitter and welder who can read complex blueprints and mig and flux weld. Looking for job shop background, no production. Company Description Global Technical Recruiters offers ...

Welder, MIG, TIG & Stick Welder, 4 needed


Posted 10 days ago, Dover, PA, USA
Welder, MIG, TIG & Stick Welder, 4 needed - Sheet metal manufacturer seeks 4 Welders with at least 1 year of MIG, TIG & Stick welding experience to work at their facility in Dover, PA. These are ...

Experienced, Certified Welder


Posted 10 days ago, Leetsdale, PA, USA
Experienced Stick Welder Needed. Manufacturer of Natural Gas Process Equipment seeking a welder with API 1104 / 6G Pipe Experience. Applicant must be efficient in downhill stick (SMAW) welding. Other ...

Welder MIG TIG -Steel


Posted 3 days ago, North Wales, PA, USA
As an Aluminum TIG and Steel MIG welder, the candidate would need the following: *Experience with various forms of welding *Familiar with production-style welding *Knowledge of welding fixtures *Must ...

Welder


Posted 10 days ago, Garfield Heights, OH, USA
Welder - Fabricator Would you like to work for one of the best steel fabricators in the United States? A Company located in Northeast Ohio is looking for a qualified full-time welder-fabricator

Magnet Welder


Posted 4 days ago, New Castle, PA, USA
Makes welding repairs to magnet equipment as needed * Weld Carbon, Manganese and Stainless steel * Cut steel using a plasma arc or torch * Follows all safety policies and procedures * Complete ...

Aluminum Welder


Posted 2 days ago, Central Islip, NY, USA
We are seeking an experienced Aluminum Welder to become an integral part of our team! In addition to welding you will be responsible for completing work orders and other required tasks for our ...

Structural Welder - Helper


Posted 9 days ago, Chesapeake, VA, USA
Interested Welders should between 1 -3 years of experience. All candidates must review the below requirements and submit a detailed resume. QUALIFICATIONS AND EXPERIENCE: * Must be able to read and ...

TIG Welder - Fabricator


Posted 15 days ago, Lenoir, NC, USA
We are seeking a TIG Welder - Fabricator to become an integral part of our team! The Welder will use specialized equipment to weld and assemble newly designed equipment for the pet food industry

Welder


Posted 16 days ago, Hamilton Square, NJ, USA
Welders with the following skills are encouraged to apply: * Read and interpret project plans, blueprints and other written instructions and diagrams to perform task at hand * Perform MIG, TIG and ...

Certified Welder - 3rd Shift


Posted 11 days ago, Clyde, NY, USA
Hand weld (TIG) aerospace alloys (nickel, cobalt, stainless, etc.) for gas turbine fuel nozzles. Works with general guidance in a team environment. Key Responsibilities Include: * Read and interpret ...

Welder Journeyman 6G


Posted 15 days ago, Warren, OH, USA
Performs welding processes on aluminum, steel and other metals' parts using welding metals and metal alloys. * Welds parts according to engineering drawings and specifications. * Under general ...

Welder Fabricator


Posted 10 days ago, Charlotte, NC, USA
Millwright could Travel) Welder/fabricator - Build Special machinery, Read blue prints/ reproduce wire, tig-weld and assemble a variety of components... HURRY IN TO INTERVIEW FOR THESE POSITIONS

Welder/Mechanic


Posted 18 days ago, Allentown, PA, USA
CERTIFIED 6G WELDER/PIPEFITTER JOB DESCRIPTION National contractor looking for certified 6G welder/pipefitters for long term projects in various locations throughout the nation with of OT ...

Welder Fabricator


Posted 9 days ago, Bethlehem, PA, USA
Gerhart has an immediate opening for a Welder / Fabricator at our Allentown, PA Facility. Position Requirements * Ability to fabricate from professional blue prints or sketches as required * Familiar ...

Mig - Stick Welder - Fitter - Fabricator - 2 needed - LM


Posted 14 days ago, Mentor, OH, USA
This manufacturing company is seeking skilled Mig/Stick Welder/Fabricator/Fitters to fabricate and install customer metal components and read blueprints. In addition, you will perform Aluminum ...

Welder Fitter


Posted 16 days ago, Bangor, PA, USA
A reputable growing equipment manufacturer in Bangor Pa is seeking an experienced welder for their company. The ideal candidate must have 2-3 years of MIG/TIG experience with Stainless, Carbon and ...

Aluminum Welder


Posted 22 days ago, York, PA, USA
The Welder will set-up and operate handheld or machine guided welding equipment, joins and builds up surfaces of materials in or out of position using positioners, fixtures, hand layout or any other ...

Welder II


Posted 16 days ago, Wilson, NC, USA
Perform duties as MIG/stick fit up welder in manufacturing of vacuum tanks from various materials, including carbon steel, aluminum and stainless steel 1. Assist with assembly and fabrication of ...

Aluminum TIG Welder


Posted 11 days ago, Cleveland, OH, USA
Cleveland Tank and Supply is looking to hire for a permanent position an experienced Aluminum TIG Welder for our 1st & 2nd shift in our metal fabrication facility located in Cleveland, OH. Our ideal ...

Tig Welder


Posted 26 days ago, Corry, PA, USA
Tig Welder Corry Manufacturing Company, a northwestern PA manufacturer of component parts for the aerospace and gas turbine industries is looking to fill the following position: Tig Welder This ...

MIG Welder


Posted 21 days ago, Kent, OH, USA
Seeking MIG welder for aluminum for a manufacturing envirnoment Requirements: 1. High School or GED 2. At least 3 years of welding experience 3. Ability to read blue prints 4. Experience with MIG ...

Welder - 2nd Shift


Posted 28 days ago, Warminster, PA, USA
Welder Department: Fabrication Accountability: This position reports to the Production Supervisor - Fabrication Responsibilities: * Responsible for welding various metals: stainless steel, aluminum ...

Now Hiring Experienced Pipe Welders (PW3 - 23218)


Posted 4 days ago, Claremont, NC, USA
WELDER REQUIREMENTS: * Welders must have at least 6 years of commercial pipe welding experience. * Welders must be able to read and understand blueprints and work with little to no supervision

Welder Fabricator


Posted 1 month ago, Auburn, NY, USA
A welder must be competent in using potentially dangerous equipment following all safety precautions. The ideal candidate will also have a steady hand and great attention to detail. Knowledge of ...

Welder


Posted 1 month ago, Independence, VA, USA
Welding Lead Department: Manufacturing I. General Position Summary The Welder is responsible for welding metal components utilizing proper welding equipment to manufacture parts and assemblies as ...

Pipe/Plate Fitter and Welders


Posted yesterday, Coraopolis, PA, USA
Job Description - Pipe/Plate Fitter and Welders · Shifts 1st - 7am-3:30pm · Overtime Required · Pay rate $16-18 with increase upon hire · Weld Test will be preformed · Weld Sleeves and STL Boots ...

Welders


Posted yesterday, Kernersville, NC, USA
Looking for welder fabricators with mig, tig, tig experience in Sheet Metal fabrication. Must be able to weld sheet metal and fabricate. Willing to work overtime and weekends when needed. Must have ...

MIG/TIG WELDER


Posted 1 month ago, Saxonburg, PA, USA
The Welder will use specialized equipment to weld and assemble new metal forms. Responsibilities: * Manufacture and fabricate finished metal products * Install and repair various equipment and ...

Welder-Mig Welding, Flux Core Wire


Posted 22 days ago, Barberton, OH, USA
Welder/Fitters Barberton, Ohio 1st Shift: Monday - Friday 6 am - 2:30 pm We are in need of "Well" Qualified candidates for the following positions for a fabrication company in Akron, Ohio